Cost guide

Gutter Guard Installation Cost UK: Fitted Prices by Guard Type

Fitted gutter guards typically cost £300–£1,200 in the UK: about £300–£500 for brush or foam guards on a bungalow, £500–£850 for clip-on mesh on a two-storey house, and up to £1,200 for stainless micro-mesh on a large property.

⏱ 6 min readUpdated 3 November 2026Covers: Gutter Cleaning, Gutter Guard Installation
Illustration of three gutter cross-sections side by side, one fitted with mesh, one with a brush insert and one with foam, with a stack of leaves above them and an amber pound coin

Gutter guard installation typically costs between £300 and £1,200 in the UK, fitted. The wide range is mostly the guard itself: brush and foam inserts are cheap, rigid clip-on mesh sits in the middle, and fine stainless micro-mesh is the dearest. The size of the house and the height of the gutters do the rest.

Guards are sold on one promise, fewer clean-outs. They reduce what gets in; they do not stop everything. Fine silt and tile grit still collect, and some guards need lifting out for the clean they are meant to avoid. This guide is about the price. How the types differ is for the comparison guides.

What fitted gutter guards cost

Indicative UK costs for fitted gutter guards

JobTypical costExample
Brush or foam guards on a bungalow or small terrace£300–£500Inserts laid along one or two short runs after a clean, with outlets protected
Clip-on mesh guards on a two-storey semi or detached house£500–£850Rigid mesh clipped over front and back runs, corners and stop ends finished
Stainless micro-mesh, large detached or three-storey property£850–£1,200Fine-mesh system on long or high runs, fixed under the roof covering or to the gutter edge

Prices usually include a full gutter clean before the guards go in. Outlet cages on their own are much cheaper, and some firms add them to a standard clean for a small extra charge.

What pushes a quote up

  1. Total length of gutter. Guards are charged more or less by the metre, so a long, many-cornered roofline costs far more than a simple terrace
  2. Mesh quality. Fine stainless mesh keeps out pine needles and tile grit that coarser plastic lets through, and costs correspondingly more
  3. Height and access. A three-storey house or a run over a conservatory needs a tower or platform
  4. Repairs first. A sagging section or leaking joint is easier to fix before guards cover it, and the work gets added to the quote
  5. Roof covering. Some guards tuck under the lowest row of tiles. That needs a careful hand and may affect a roof warranty

Is it worth it?

It depends on what is dropping into the gutters. Broadleaf trees close to the house, pine and birds nesting at the eaves are the usual reasons to fit them. A house with open sky and a yearly vacuum clean costing £90–£130 may take decades to earn the guard cost back. Spending £700 to avoid a clean that might cost £110 is hard to justify on money alone; the case for guards is more about hard-to-reach gutters, a conservatory run, or a landlord who does not want to arrange annual visits.

Questions that expose a weak quote

Ask which guard type is proposed and why it suits your trees. Ask whether the price includes the clean and any pre-fit repairs, how the guard is fixed, and what the inspection routine will be afterwards. If the answer to the last one is 'none needed', be cautious: every guard needs checking occasionally.

Related reading

Which trees cause the most trouble is covered in a later guide on trees that fill gutters. If the real issue is downpipes clogging, downpipe cleaning and repairs and the blocked downpipe cost guide are the better place to start. For a budget figure across every service, use the gutter cleaning cost calculator.

Frequently asked questions

How much does it cost to fit gutter guards on a house?

As a guide, expect around £500–£850 for clip-on mesh on a typical two-storey semi or detached house, and more for fine stainless mesh or a larger property.

Do gutter guards stop me needing to clean my gutters?

They reduce how often, but rarely to never. Fine debris and silt can still build up beneath or on top of a guard, so an occasional check is sensible.

Can gutter guards be fitted to any gutter?

Most standard profiles take some type of guard, but old, sagging or damaged gutters should be repaired first. Some guards suit half-round gutters better than square ones.

Will gutter guards affect my roof?

Guards that tuck beneath the lowest tile row can affect tile fixings or a roof warranty if badly fitted. Ask the installer how the guard is fixed and whether it touches the roof covering.

Ready to talk to a gutter cleaning specialist?

Get Free Quotes →