Gutter joint and seal repairs typically cost between £60 and £220 in the UK. This guide is about a particular moment: a gutter clean, a clearing or just a heavy shower shows that a corner or union is dripping, and you want to know what the fix costs.
Plastic gutter lengths meet at unions, each with a rubber gasket that keeps the seam watertight. Over the years the rubber hardens, the clip loosens, or the sections drift apart as the gutter moves with the seasons. The result is a drip at the same spot every time it rains.
What seal and joint repairs cost
Indicative UK costs for gutter seal and joint repairs
| Job | Typical cost | Example |
|---|---|---|
| Re-seat or replace one plastic union or corner | £60–£100 | A single gasket renewed and the sections clipped back together, tested with water |
| Several joints, stop ends or outlets in one visit | £100–£160 | Two or three failing seals replaced along a run, with an end cap or outlet reseated |
| Cast iron joints re-bedded or high-level access | £160–£220 | Bolted cast iron joints cleaned and re-bedded, or plastic joints on an upper storey that need a tower |
If you are already paying for a visit, joint work is cheaper added on than booked alone. A decent gutter cleaning visit often spots the drip, and many firms will fix a simple gasket there and then for a small extra.
What moves the price
- How many joints have failed. Two seals in a run suggest age, and the rest are probably close behind
- Profile. A common half-round or square union is easy to match. An older or unusual profile may need an adaptor
- Material. Plastic joints are quick. Cast iron joints are bolted and sealed, and dismantling them is slow
- Height. A union at single-storey height is quick from a ladder. One above an extension roof needs a tower
- Whether it is really the joint. A drip at a union can also come from a nearby blockage pushing water out of the seam
Sealant is not a fix
A bead of sealant squeezed round a leaking union looks like a cheap answer and often holds for a while. The trouble is that plastic gutters expand and contract, and an unsuitable adhesive can stop the joint moving as designed, which cracks it in a different place. A replacement gasket or union costs little more and lasts. Treat quotes that rely on sealant alone with some caution unless the reason is spelled out.
A stain below a joint does not prove the joint is leaking. Blocked gutters push water out through the weakest point, which is often a union. If the run was full of silt, the joint may be fine once cleared. A cleaner can usually tell by running water through after the clean.
Next steps
If a drip appears with an overflow, start with why a gutter overflows to see whether the joint is cause or symptom. A run that has also dropped may need support work, priced in the sagging gutter repair cost guide. For a quick budget across all six services, use the gutter cleaning cost calculator.
Frequently asked questions
How much does it cost to fix a leaking gutter joint?
As a guide, re-seating or replacing a single plastic union is typically £60–£100. Several joints on one visit tend to be £100–£160.
Can I just reseal a gutter joint with silicone?
It sometimes holds briefly, but plastic gutters move, and sealant can stop the joint flexing properly. A new gasket or union is usually the longer-lasting repair.
Why does my gutter drip at the corner?
The corner union may have a worn gasket, a loose clip or sections that have drifted apart. A blocked gutter backing water into the corner can look the same, so clear the run first.
Will insurance pay for a leaking gutter joint?
Gradual wear is generally not covered, whereas sudden storm damage may be. Check your policy wording, because exclusions vary between insurers.
Ready to talk to a gutter joint and seal repairs specialist?
Get Free Quotes →
